Skip to main content

Victaulic® VicPlus™ L060744GE0 Adapter, 6 in Nominal, Flanged End Style, 175 psi Pressure, 125/150 lb, Ductile Iron

Victaulic_L020744GE0.jpg

Description

Victaulic® VicPlus™ Adapter, Series: 744, 6 in Nominal, Flanged, 1 in Thickness, 125/150 lb, 175 psi, Ductile Iron, Hot Dipped Galvanized, 12 in OD x 1 in W

Style 744 FireLock Flange adapter is designed for directly incorporating flanged components with ANSI CL. 125 or CL. 150 bolt hole patterns into a grooved pipe system. Sizes 2 - 8 in (50 - 200 mm) are hinged for easy handling with integral end tabs which facilitate assembly. The design incorporates small teeth inside the key shoulder I.D. to prevent rotation. Because of the outside flange dimension, FireLock Flange adapters should not be used on FireLock fittings. When wafer or lug-type valves are used adjoining a Victaulic fitting, check disc dimensions to assure proper clearance. FireLock Flange adapters should not be used as anchor points for tie-rods across nonrestrained joints. Mating rubber faced flanges, valves, etc., require the use of a FireLock Flange washer. FireLock Flange adapters with Vic-Plus gaskets do not require lubrication. The gasket must always be assembled with the color coded lip on the pipe and the other lip facing the mating flange.

Specifications

Dimensions 12 in OD x 1 in W
End Style Flanged
Finish Hot Dipped Galvanized
Material Ductile Iron
Nominal Size 6 in
Pressure Class 125/150 lb
Pressure Rating 175 psi
Series 744
Thickness 1 in

Standards and Approvals: ASTM A536 Grade 65-45-12, FM Approved, UL Listed

Features

  • Grade "E" Type A EPDM gasket

Resources

Recently Viewed Items